What’s Special About the Robot Window Cleaner Main PCB?
The Robot Window Cleaner Main PCB is an essential component of the robotzoo Gecko, Gecko II, Glider, Glider II and Glider III window cleaners. It is the brains behind the programming and behaviour of the device.
Each model has a specific PCB which determines its programming and behaviour. The main PCB is powered from the adapter, and controls the recharging of the on-board safety battery, as well as interpreting feedback from the bump sensors in the device.
If the device does not start, and no lights are visible when it is turned on, then it is likely that the main PCB need replacement. Just open the casing of the device by removing the casing screws, and the main PCB can be seen, secured to the chassis of the device with screws. The attached leads can be removed, the old PCB removed, the new PCB installed, and the leads reattached. Then it is a matter of re-sealing the casing with the screws. Try to ensure that you don’t have any screws left over!
Reviews
There are no reviews yet.