Gecko II New User Manual

The Gecko II New User Manual is an online guide to this robotic window cleaning device.

It is provided here for your convenience in case you lose the physical manual booklet, or if you just want to read on your spartphone.

Please contact robotzoo if you encounter problems with yoiur device that are unable to be resolved by reference to this manual.

Gecko II New, robot, window cleaner, window robot, accessories

Gecko II, Gecko II New, window cleaner, robotic window cleaner,

Gecko II New, robot, window cleaner, window robot

Scan the Code to
Keep this Guide on your Phone

Technical Support

Please contact robotzoo if you encounter problems with yoiur device that are unable to be resolved by reference to this manual.

Disclaimer

Regarding the contents of this manual, robotzoo does not make any statement to clarify the applicability of the product for any specific purpose.
robotzoo maintains the right to change the procuct and its related documentation without notice.

Precautions

Please read these precautions. The precautions must be observed and adhered to.

Please pay particular attention to instructions about re-charging the device batteries.

Always ensure that the device is dry before the device is put on charge:

The precautions must be observed and adhered to.

Failure to observe and adhere to these precautions may result in the warranty being voided.

robotzoo will not held liable for any loss or injury caused by improper use.

Read this manual carefully before use, and use the device according to the manual.
Fasten the safety rope to the device at one end, and a secure fixture at the other end, in order to avoid the danger of a fall.
Check that the safety rope is not damaged or loose before operating the device.
Display appropriate warning signs when cleaning exterior windows without a balcony.
Use only the original and authorised power supply with the device.
If the power adapter or its cables are damaged, they must be replaced by a certified professional.
The cleaning rings and cleaning pads should be installed securely to avoid air leakage before use.
The device must be connected via the power supply to mains power (switched on) for normal use.
The UPS battery on the device should be fully charged (indicated by a green light) before use.
The device power switch should be turned on, with the vacuum adsorbtion fan running, before use.
The device should be adhered to the glass before letting go.
Do NOT use the device in rainy or wet weather.
Do NOT spray water directly on the device.
Do NOT use near flammable fluids or gases.
Do NOT use detergent on the glass. Use only water, or window cleaning solutions.
Do NOT let children use or play with the device. This product is NOT a toy.
Do NOT allow children in the area beneath where the device is operating.
Do NOT use on cracked glass.
Do NOT use on reflective or coated glass. The cleaning wheel may scratch the coatings.
Do NOT let hair, clothes, fingers, or any part of the body close to openings or rotating parts of the device.
Do NOT use or store the device near any heat source.
Do NOT cover the device with anything when re-charging, to prevent damage of internal electrical components caused by overheating.
Do NOT disassemble the device, without approval from robotzoo.
Always use an earthed and leakage protected wall socket with the device.
Always power off the device whenever it is being maintained, cleaned or not in use.
Always store the device in a cool and ventilated place, away from direct sunshine, when re-charging or not in use.
When stored, the device should be charged every three months, in order to maintain the life of the UPS battery.