fbpx

Robot Mower Touch Sensors

The following describes how to troubleshoot and diagnose the robot mower touch sensors.
The touch sensors are situated on the rear handle of the device. They are designed to cause the mower to stop if the handle at the rear of the device is grabbed. There are two sensors on the handle. Left and Right.
First, check that the Touch sensor is active.
This is indicated by a T symbol on the control display, as shown.
Test the touch sensors by grabbing the rear handle on either and both sides, whilst in diagnostic mode:
  • L / R = Left / Right
  • 0 / 1 = No Touch / Touch
Scroll to Top