Boundary Wire Pegs

The Robot Lawn Mower Boundary Wire Pegs are an important part of the overall installation for lawn mowing by the robotzoo Wombat and Wombat Joey.

What’s in the Robot Lawn Mower Boundary Wire Pegs?

  • Boundary Wire Pegs – 100x 7cm plastic ground pegs to hold down boundary wire;


Availability: In stock

Share on facebook
Share on whatsapp
Share on google
Share on twitter
Share on email

What are the Robot Lawn Mower Boundary Wire Pegs?

The Robot Lawn Mower Boundary Wire Pegs are used to fasten the robotzoo Lawn Mower Boundary Wire to the lawn surface, as shown in the instruction manual. The pegs prevent the boundary wire from lifting and potentially being cut by the mower blades while the lawn mower is operating. It is recommended that the pegs be placed about one metre apart along the length of the boundary wire. There are 100 pegs provided in a packet.

The Boundary wire can also be buried up to 5cm beneath the lawn, to hide it from view. However, it is recommended on first installation to use the pegs provided with a new mower, in order to get the right distance between the boundary wire and the border of the lawn, which should be around 40cm, according to the instruction manual.

The mowers are programmed to detect when they cross over the boundary wire, and then change direction to return to the mowing area. They are also programmed to follow the boundary wire back to the charging station when they need to recharge. If the boundary wire is broken or cut, the base station will sound an alarm, and the mower will not operate in automatic mode (it can still be made to operate in manual mode).

Weight .5 kg
Dimensions 15 × 10 × 10 cm


There are no reviews yet.

Be the first to review “Boundary Wire Pegs”

Your email address will not be published. Required fields are marked *

Scroll to Top